Informations techniques
For hinge ranges, please refer to pages 51/52/53/54/55/56/57/58/59
Produits connexes
-
![Square counter-hinge - 35x2 - H.200xL.250 - square holes of 7.5]()
Square counter-hinge – 35×2 – H.200xL.250 – square holes of 7.5
-
![Square counter-hinge - 35x2 - H.200xL.250 - 5 round holes]()
Square counter-hinge – 35×2 – H.200xL.250 – 5 round holes
-
![Square counter-hinge - 35x3 - H.200xL.250 or H.300xL.300 - square holes of 7.5]()
Square counter-hinge – 35×3 – H.200xL.250 or H.300xL.300 – square holes of 7.5
-
![Square counter-hinge - 35x3 - H.200xL.250 or H.300xL.300 - round holes of 5]()
Square counter-hinge – 35×3 – H.200xL.250 or H.300xL.300 – round holes of 5
-
![Intermediate counter-pivot - 34x3 - H.200 - square holes of 7.5]()
Intermediate counter-pivot – 34×3 – H.200 – square holes of 7.5
-
![Intermediate counter-pivot - 34x3 - H.200 - 5 round holes]()
Intermediate counter-pivot – 34×3 – H.200 – 5 round holes
-
![Intermediate counter-pivot - 34x3 - H.300 - square holes of 7.5]()
Intermediate counter-pivot – 34×3 – H.300 – square holes of 7.5
-
![Intermediate counter-pivot - 34x3 - H.300 - 5 round holes]()
Intermediate counter-pivot – 34×3 – H.300 – 5 round holes
-
![Intermediate counter-pivot - round end - 34x3 - H.150 - square holes of 7.5]()
Intermediate counter-pivot – round end – 34×3 – H.150 – square holes of 7.5
