- Home
- PVC and Aluminum wing shutter accessories
- Aluminum Straight hinges for single and multiple leaves
- Invisible adjustable straight hinge system InviRenov®
Invisible adjustable straight hinge system InviRenov®
Introduction
The patented InviRenov® system allows for invisible adjustment of straight hinges while maintaining the aesthetic of fixed straight hinges, before final installation. Specially designed for renovation, it has a 2-axis (x and y) adjustment system that can adapt to existing hinges. The adjustment is then locked in place by fixing screws that ensure the stability of the system over time. It is available in two mounting principles: – Hinge/counter-hinge mounting – Hinge/bar mounting
Product advantages
Invisibility of the adjustment system Easy installation Unaltered aesthetics of the shutters
Informations techniques
Specifications for hinge/bar installation
The installation is easy and done safely: adjustment is done from the inside when the shutters are on the upper floor (traditionally adjusted from the outside).
Possibility to obtain hinges, counter-hinges, and kits in RAL 9010 30% TB – Please contact us.
Produits connexes
-
InviRenov® Kit for counter-hinge mounting – 6.5 square holes.
-
InviRenov® Kit for counter-hinge mounting – 7.5 square holes
-
InviRenov®/T3C Kit for counter-hinge mounting – square holes of 7.5
-
InviRenov® Kit for hinge bar assembly – square holes of 6.5 and 7.5
-
InviRenov® hinge – festoon end – Ø14 – 39×3.7 – offset 14×85 – square holes of 6.5
-
InviRenov® hinge – festoon end – Ø14 – 39×3.7 – offset 14×85 – square holes of 7.5
-
InviRenov® hinge – festoon end – Ø14 – 39×3.7 – offset 19×85 – square holes of 6.5
-
InviRenov® hinge – festoon end – Ø14 – 39×3.7 – offset 19×85 – square holes of 7.5
-
InviRenov® hinge – festoon end – Ø16 – 39×3.7 – offset 20×85 – square holes of 7.5
-
InviRenov® counter-pivot – festoon end – 1st hole at 15 – 39×3 – square holes of 6.5
-
InviRenov® counter-pivot – festoon end – 1st hole at 25 – 39×3 – square holes of 6.5
-
InviRenov® counter-pivot – festoon end – 1st hole at 15 – 39×3 – square holes of 7.5
-
InviRenov® counter-pivot – festoon end – 1st hole at 25 – 39×3 – square holes of 7.5
-
InviRenov® hinge – round end – Ø14 – 39×3.7 – offset 14×85 – square holes of 7.5
-
InviRenov® counter-pivot – round end – 1st hole at 25 – 39×3 – square holes of 7.5
-
InviRenov® hinge – square end – Ø14 – 39×4.7 – offset 38×85 – square holes of 6.5
-
InviRenov® hinge – square end – Ø14 – 39×4.7 – offset 48×85 – square holes of 6.5
-
InviRenov® counter-hinge – square end – 1st hole at 15 – 39×3 – square holes of 6.5
-
InviRenov® counter-pivot – square end – 1st hole at 25 – 39×3 – square holes of 6.5
-
Twin hinge with axle – Ø14 – for offset hinge 14 – square holes of 6.5
-
InviRenov® hinge – festoon end – Ø14 – 39×4.7 – offset 48×85 – square holes of 6.5
-
InviRenov® hinge – square end – Ø14 – 39×4.7 – offset 38×85 – square holes of 7.5
-
InviRenov® hinge – square end – Ø14 – 39×4.7 – offset 48×85 – square holes of 7.5
-
InviRenov® hinge – square end – Ø16 – 39×4.7 – offset 48×85 – square holes of 7.5
-
InviRenov® counter-pivot – square end – 1st hole at 15 – 39×3 – square holes of 7.5
-
InviRenov® counter-pivot – square end – 1st hole at 25 – 39×3 – square holes of 7.5
-
Twin hinge with axle – Ø14 – for offset hinge 14 – square holes of 7.5
-
InviRenov® hinge – festoon end – Ø14 – 39×4.7 – offset 48×85 – square holes of 7.5