- Home
- Rolling shutter accessories
- Built-in and surface-mounted lock for roller shutters
- AA40 Shutter built-in lock
AA40 Shutter built-in lock
Introduction
With a minimal thickness (less than 7.5 mm), this lock can be adapted to all types of aluminum or PVC slats, whether they are final or intermediate, with a thickness of 7 to 9 mm (cylinder length 6), or 13 to 15 mm (cylinder length 12), for recessed monobloc installation.
Informations techniques
Finish
Galvanized steel, galvanized+painted or lacquered brass.
Possibility of keyed alike cylinder: add S to the article code. Possibility to order replacement keys cut ref AA217001, specify the key number from 01 to 40.
Produits connexes
-
AA40 lock with security cylinder for blade thickness 7 to 9 – 1 hinge H.3.5
-
AA40 lock with security cylinder for blade thickness 7 to 9 – 2 pivots H.3,5
-
AA40 lock with security cylinder for blade thickness 13 to 15 – 1 short pivot H.3,5
-
AA40 lock with security cylinder for blade thickness 13 to 15 – 1 long pivot H.9
-
AA40 lock with security cylinder for blade thickness 13 to 15 – 2 short pivots H.3,5
-
AA40 lock with security cylinder for blade thickness 13 to 15 – 2 long pivots H.9
-
AA40 thin aluminum backing plate for blade thickness 7.5 to 8mm
-
Screw FX – Ø3xL.8 – stainless steel 304
-
AA40 thin composite backing plate for blade thickness 7.5 to 8 or 9.5 to 11
-
AA40 thick composite backing for blade thickness 7.5 to 8 or 13 to 15