Invisible adjustable straight strap hinge system – InviRenov®

Introduction

The patented InviRenov® system allows invisible adjustment of straight strap hinges while maintaining the aesthetic appearance of fixed straight strap hinges, before final fastening. Specially designed for renovation, it has a 2-axis adjustment system (x and y) that can be adapted to existing hinges. The adjustment is then locked in place by fastening screws to ensure the system remains stable over time. The system can be assembled in two ways: – T strap hinge/counter-T strap hinge assembly – T strap hinge/bar assembly

Technical information

T strap hinge/counter-T strap hinge assembly specificities

It is easy and safe to install, and can be adjusted from the inside when the shutters are upstairs (traditionally adjusted from the outside).

T strap hinge/bar assembly specificities

Based on the same adjustment and invisibility concept, this configuration is designed to match the aesthetics of shutters with a sling bar.

Finishing stage

Available in 2 types of ends: scalloped or round.

It is possible to order T strap hinges, counter-T strap hinges and sets in RAL 9010 30% Brigthness rate – Please contact us.

Invisible adjustable straight strap hinge system – InviRenov®

Introduction

Product advantages

Technical information

T strap hinge/counter-T strap hinge assembly specificities

T strap hinge/bar assembly specificities

Finishing stage

Related products

Set of 6.5mm square holes – counter T strap hinge assembly – InviRenov®

Set of 6.5mm square holes – counter T strap hinge assembly – InviRenov®

Set of 7.5mm square holes – counter T strap hinge assembly – InviRenov®/T3C

Set of 6.5 and 7.5 mm square holes T strap hinge – bar T strap hinge assembly – InviRenov®

T strap hinge – scalloped end – Ø14 – 39×3.7 – offset 14×85 – 6.5 mm square holes – InviRenov®

T strap hinge – scalloped end – Ø14 – 39×3.7 – offset 14×85 – 7.5 mm square holes – InviRenov®

T strap hinge – scalloped end – Ø14 – 39×3.7 – offset 19×85 – 6.5 mm square holes – InviRenov®

T strap hinge – scalloped end – Ø14 – 39×3.7 – offset 19×85 – 7.5 mm square holes – InviRenov®

T strap hinge – scalloped end – Ø16 – 39×3.7 – offset 20×85 – 7.5 mm square holes – InviRenov®

Counter T strap hinge – scalloped end – 1st hole at 15 – 39×3 – 6.5 mm square holes – InviRenov®

Counter T strap hinge – scalloped end – 1st hole at 25 – 39×3 – 6.5 mm square holes – InviRenov®

Counter T strap hinge – scalloped end – 1st hole at 15 – 39×3 – 7.5 mm square holes – InviRenov®

Counter T strap hinge – scalloped end – 1st hole at 25 – 39×3 – 7.5 mm square holes – InviRenov®

T strap hinge – round end – Ø14 – 39×3.7 – offset 14×85 – 7.5 mm square holes – InviRenov®

Counter T strap hinge – round end – 1st hole at 25 – 39×3 – 7.5 mm square holes – InviRenov®

T strap hinge – square end – Ø14 – 39×4.7 – offset 38×85 – 6.5 mm square holes – InviRenov®

T strap hinge – square end – Ø14 – 39×4.7 – offset 48×85 – 6.5 mm square holes – InviRenov®

Counter T strap hinge – square end – 1st hole at 15 – 39×3 – 6.5 mm square holes – InviRenov®

Counter T strap hinge – square end – 1st hole at 25 – 39×3 – 6.5 mm square holes – InviRenov®

Pairing hinge with pin – Ø14 – for T strap hinge with 14mm offset – 6.5 mm square holes

T strap hinge – scalloped end – Ø14 – 39×4.7 – offset 48×85 – 6.5 mm square holes – InviRenov®

T strap hinge – square end – Ø14 – 39×4.7 – offset 38×85 – 7.5 mm square holes – InviRenov®

T strap hinge – square end – Ø14 – 39×4.7 – offset 48×85 – 7.5 mm square holes – InviRenov®

T strap hinge – square end – Ø16 – 39×4.7 – offset 48×85 – 7.5 mm square holes – InviRenov®

Counter T strap hinge – square end – 1st hole at 15 – 39×3 – 7.5 mm square holes – InviRenov®

Counter T strap hinge – square end – 1st hole at 25 – 39×3 – 7.5 mm square holes – InviRenov®

Paring hinge with pin – Ø14 – for T strap hinge with 14mm offset – 7.5 mm square holes

T strap hinge – scalloped end – Ø14 – 39×4.7 – offset 48×85 – 7.5 mm square holes – InviRenov®