145mm center distance
Introduction
The 145 range consists of hinges, adjustable hinges, counter-hinges, and twin hinges.
Informations techniques
Technical specifications
Center distance of 145 mm
Produits connexes
-
Right hinge – festoon end – Ø14 – 39×3.7 – square holes of 7.5 – offset 11×70
-
Right hinge – festoon end – Ø14 – 39×3.7 – square holes of 7.5 – offset 14×70
-
Right counter-hinge – festoon end – 39×3 – square holes at 7.5 – first hole at 15
-
Cuttable right hinge – square end – Ø14 – 39×4.7 – square holes of 7.5 – offset 38×70
-
Cuttable right hinge – square end – Ø14 – 39×4.7 – square holes of 7.5 – offset 48×70
-
Cuttable right-hand counter-hinge – square end – 39×3 – square holes of 7.5
-
Twin hinge with axle – Ø14 – for offset hinge 14 – square holes of 7.5
-
Right hinge – festoon end – Ø14 – 39×3.7 – square holes of 6.5 – offset 14×85
-
Right counter-hinge – festoon end – 39×2 – square holes of 6.5 – first hole at 15
-
Right counter-hinge – festoon end – 39×3 – square holes of 6.5 – first hole at 25
-
Cuttable right hinge – square end – Ø14 – 39×4.7 – square holes of 6.5 – offset 48×85
-
Cuttable right-hand counter-hinge – square end – 39×3 – square holes of 6.5
-
Twin hinge with axle – Ø14 – for offset hinge 14 – square holes of 6.5
-
Right hinge – fish tail – Ø14 – 39×3.7 – square holes of 7.5 – offset 11×70
-
Right hinge – fish tail – Ø14 – 39×3.7 – square holes of 7.5 – offset 14×70
-
Right counter-hinge – fish tail – 39×3 – square holes 7.5
-
Cuttable right hinge – square end – Ø14 – 39×4.7 – square holes of 7.5 – offset 38×70
-
Cuttable right hinge – square end – Ø14 – 39×4.7 – square holes of 7.5 – offset 48×70
-
Cuttable right-hand counter-hinge – square end – 39×3 – square holes of 7.5
-
Twin hinge with axle – Ø14 – for offset hinge 14 – square holes of 7.5
-
Right hinge – round end – Ø14 – 39×3.7 – square holes of 7.5 – offset 14×70
-
Right hinge – round end – Ø14 – 39×3.7 – square holes of 6.5 – offset 14×85
-
Right hinge – round end – Ø14 – 39×3.7 – square holes of 7.5 – offset 14×85
-
Right hinge – round end – Ø16 – 39×3.7 – square holes of 6.5 – offset 15×85
-
Right counter-hinge – round end – 39×3 – square holes of 6.5 – first hole at 15
-
Right counter-hinge – round end – 39×3 – square holes of 7.5 – first hole at 15